12 Tricks To Kick Your Worst Residential Plastering Habits

If you’re a professional plasterer, then chances are you’ve developed some bad habits over the years. Read more to learn. 

Worker Plastering Ceiling stock photo

Here are 12 of the most common residential plastering habits that you should kick to the curb:

1. Not Wearing The Proper Protective Gear

When you’re on a job site, it’s important to wear the proper protective gear at all times. This includes wearing a dust mask to avoid inhaling any harmful particles, as well as gloves and eye protection to avoid getting any plaster or other materials in your eyes.

2. Not Measuring Twice, Cutting Once

One of the most common mistakes that plasterers make is not measuring twice before cutting. This can often lead to inaccurate cuts which can then cause problems later on. To avoid this, always measure twice and cut once to ensure accuracy.

3. Not Mixing The Plaster Correctly

If you don’t mix the plaster correctly, it can often lead to a poor finish. Be sure to follow the manufacturer’s instructions carefully when mixing the plaster so that it turns out perfect every time.

4. Applying Too Much Pressure

When plastering, it’s important to apply even pressure so that the plaster adheres properly to the surface. Applying too much pressure can often lead to an uneven finish, so be sure to apply just enough pressure for a smooth, even coat of plaster.

5. Applying Too Much Plaster

When you’re applying plaster, it’s important to use just the right amount. If you apply too much, it will take longer to dry and could crack when it dries. On the other hand, if you don’t apply enough, the surface won’t be smooth and even.

6. Not Letting The Plaster Dry Completely

If you try to apply the second coat of plaster before the first coat has had a chance to dry completely, it can often lead to an uneven finish. Be sure to let the first coat of plaster dry completely before applying the second coat.

7. Not Sanding Between Coats

If you don’t sand between coats of plaster, it can often lead to an uneven finish. Be sure to sand between each coat of plaster for a smooth, even finish.

8. Applying Thick Coats Of Plaster

When plastering, it’s important to apply thin coats of plaster so that it dries evenly and doesn’t crack. Be sure to avoid applying thick coats of plaster which can often lead to cracking and an uneven finish.

9. Not Cleaning Up After Yourself

When you’re finished plastering for the day, it’s important to clean up your work area so that the plaster doesn’t harden and become difficult to remove. Be sure to sweep up any excess plaster and dispose of it properly so that your work area is clean and ready for the next day.

10. Not Storing Plaster Properly

If you don’t store your plaster properly, it can often lead to drying out or becoming unusable. Be sure to store your plaster in a cool, dry place so that it stays fresh and usable for future jobs.

11. Not Following Safety Precautions

When working with plaster, it’s important to follow all safety precautions to avoid injury. Be sure to read and follow the manufacturer’s instructions carefully so that you know how to properly use and handle the plaster.

12. Not Wearing Personal Protective Equipment

When working with plaster, it’s important to wear the proper personal protective equipment such as gloves, a dust mask, and eye protection. This will help to protect you from inhaling any harmful particles and also prevent any plaster from getting into your eyes.

By following these tips, you can help to kick your worst residential plastering habits and improve the quality of your work. Be sure to practice these tips so that you can avoid making common mistakes and produce a high-quality finish.

Leave a Reply

Your email address will not be published. Required fields are marked *